Updated August 15, 2026 · WattCostLab Editorial Team
Spray Foam Insulation Cost
Spray foam pricing depends on much more than floor area. Foam type, installed thickness, surface preparation, access and the building assembly can materially change the quote.
Open-cell vs closed-cell spray foam
| Feature | Open-cell | Closed-cell |
|---|---|---|
| Density | Lower | Higher |
| Typical installed thickness | Often greater for a target thermal resistance | Can achieve higher thermal resistance per inch |
| Material use | Generally less material density | More material per volume |
| Moisture behavior | Assembly-specific | Different vapor characteristics; assembly-specific |
| Price tendency | Often lower | Often higher |
What drives the total project cost?
- Total sprayed area rather than house floor area alone.
- Required thickness and target performance.
- Open-cell versus closed-cell material.
- Removal of old insulation or contaminated materials.
- Masking, protection and preparation.
- Attic, crawlspace or other difficult access.
- Fire or ignition-barrier requirements where applicable.
- Ventilation and occupancy restrictions during installation and curing.
Why the building assembly matters
Spray foam changes both heat flow and air movement. In roof assemblies, walls and crawlspaces, moisture design is important. A contractor should be able to explain why a specific foam type and thickness are appropriate for the assembly rather than simply quoting the highest thickness possible.
How to compare quotes
- Confirm exact square footage of the sprayed surface.
- Identify product type and intended installed thickness.
- Ask whether old insulation removal is included.
- Ask who handles preparation and cleanup.
- Confirm code-related coatings or barriers, if required.
- Compare warranty terms and installer qualifications.
Related efficiency pages
Compare with Attic Insulation Installation Cost, Home Energy Audit Cost and Energy-Efficiency Home Improvements.
FAQs
Is closed-cell spray foam always better?
No. Closed-cell and open-cell foams have different properties and suitable applications. The right choice depends on the assembly, moisture strategy, climate and project goals.
Why do spray foam quotes vary so much?
Area, required thickness, foam type, access, preparation, removal of existing materials and local labor can all change the scope.
Should I choose insulation only by R-value?
No. Thermal resistance matters, but air control, moisture behavior, assembly design, installation quality and code requirements also matter.